AVK Centric Wafer Butterfly Valve

AVK Centric Wafer Butterfly Valve – Ahmedabad Supplier

AVK Centric Wafer Butterfly Valve

Introduction

Searching for an AVK centric wafer butterfly valve for water, HVAC, or process lines in Gujarat and across India? This page explains construction, variants, and selection tips for wafer-pattern resilient seated butterfly valves widely used for on–off and throttling service with compact, lightweight installation between flanges.

Description

A centric wafer butterfly valve features a concentric disc stem alignment and an elastomer-lined body for bidirectional shutoff. The wafer body fits between PN10/PN16/Class 125–150 flanges using through-bolts, enabling quick retrofit in tight piping layouts. Typical trim options include epoxy-coated ductile iron body, stainless steel or coated DI disc, and replaceable liner materials such as EPDM or NBR based on media compatibility.

Applications and Benefits

Applications	Benefits
Potable and raw water distribution, irrigation, and WTP piping Cooling and chilled water loops in HVAC plants Industrial utilities: compressed air, inert gas, light chemicals Wastewater and effluent lines in ETP and STP networks Fire water ring mains and hydrant branches where quick actuation is required	Slim wafer body reduces weight and space in skid or rack assemblies Resilient liner provides tight shutoff with low torque requirements Quarter-turn actuation enables fast isolation and simple automation Interchangeable operators: lever, gear, pneumatic or electric actuator Corrosion-protected body and shaft enhance lifecycle in outdoor service

Key Features of Centric Wafer Butterfly Valve

Concentric shaft and disc with bubble-tight resilient seat
Wafer pattern for PN10/PN16/Class 125–150 flange compatibility
Body in epoxy-coated ductile iron; disc in DI, SS or coated options
One-piece liner in EPDM or NBR with full bore sealing surface
Dry shaft design with low friction bearings and stem seals
Field-fit operators: lever for small sizes, gearbox for larger diameters
ISO top flange for direct actuator mounting and alignment
Sizes commonly from DN50 to DN600 and above depending on series

Where Centric Butterfly Valves Are Used

Water and wastewater plants: Isolation and throttling on filter, clarifier, and pumping headers
HVAC and district cooling: Chilled and condenser water loops with compact installation
Process utilities: Non-abrasive liquids and neutral media within recommended temperature limits

Selection Guidance

Match liner material to the medium and temperature range, verify flange standard and face-to-face, and size by flow velocity and allowable pressure drop. For throttling duty, consider disc position control with suitable actuator and feedback. For buried or remote locations, gear or automated actuation with position indicators improves reliability and safety.

Supplier and Support

For project submittals and replacements, specify size range, pressure class, liner and disc material, operator type, and coating. Include test and inspection requirements for hydrostatic and seat tests, and request mill certificates when required by QA plans. Proper storage and periodic operation checks help maintain sealing performance during long shutdowns.

FAQs

1. What is the difference between wafer and lug butterfly valves?

Wafer valves mount between flanges using through-bolts on both sides; lug valves have threaded inserts allowing one-side bolting and line end service. Lug bodies are preferred where downstream piping may be removed.

2. Which liner should I choose for potable water?

EPDM liners are commonly used for potable and chilled water due to good elasticity and temperature tolerance. Always confirm compliance with local water approvals and temperature limits.

3. Can these valves be used for throttling?

Yes, centric butterfly valves can throttle within recommended disc angles. Use appropriate actuators and consider cavitation, noise, and velocity limits when controlling flow.

4. What actuator options are typical?

Manual lever up to smaller diameters, worm gearboxes for larger sizes, and pneumatic or electric actuators with on–off or modulating control using the ISO top mounting interface.

5. How do I ensure long service life?

Select correct liner and disc material, maintain clean piping, operate the valve periodically, and protect coating from mechanical damage during installation.

Conclusion

Centric wafer butterfly valves offer reliable shutoff and control in compact piping layouts. With the right liner, disc material, and actuation, they provide an efficient, economical solution for water, HVAC, and utility services across industrial and infrastructure projects.

Contact Details

Talk to our specialists today for tailored solutions and fast assistance.

Company:

Shrinathji Infracon

Phone:

+91 9829101412

WhatsApp: Chat on WhatsApp

Email: Shrinathjinfracon@gmail.com

Website: siloindia.in

Address:

Shed No.1, A Matru Chaya Industrial Estate, Dhamatwan-Vanch Road, Village-Dhamatwan, Taluka-Dascroi, Ahmedabad-382435, Gujarat, INDIA

Relevant Tags

+91 9829101412

About US

Contact Info

Call Now

Email Now

Location

AVK Centric Wafer Butterfly Valve